1. Verify power to all pieces of equipment in the
system. (Camera green LED on)
2. Verify that the video cables are connected
correctly.
3. Verify that the lens cap has been removed
from the lens or that the iris of the lens is open.
1. Power down the system for one minute, then
turn power back ON.
Problem
Possible Solution
No Video
Video, but no function
6 TROUBLESHOOTING
7 MAINTENANCE
If problems occur, verify the installation of the camera with the instructions in this
manual and with other operating equipment.
Isolate the problem to the specific piece of equipment in the system and refer to
the equipment manual for further information.
Preventive maintenance allows detection and correction of minor faults before
they become serious and cause equipment failure.
Yearly maintenance on video equipment should include the following:
A
. Inspect all connecting cables for deterioration or other damage.
B
. Clean components with a clean damp cloth.
C
. Verify that all the mounting hardware is secure.
18
Dark video
1. Adjust iris. Check AI connections.
