Ultrak JPD-101, Руководство пользователя

Страница: 79 / 144

518007-3960-F 3-3 KEMU040019
April 25, 2001
3.2 PROGRAMMING THE EIGHT FUNCTION KEYS ON THE JPD-101
CONTROLLER
Function keys one through eight on the JPD-101 Controller can be programmed
to perform a single action such as calling a camera to a monitor, sending a
SmartScan unit to a PreShot, running a VectorScan on a SmartScan unit;
controlling an auxiliary device, or to perform a series of one or more of each of
the above actions. Up to eight actions can be programmed for each function key.
The function keys are programmed using the function keypad, the numeric
keypad and the small joystick on the JPD-101 Controller. The KBD-100
Programming Keyboard is not used.
Press PRGM on the function keypad.
1>Program Funct. Key
2>Quick Prg. Preshot
Press 1.
CNTL - CAM 1 MON 1
Select the Fun._Key
Select the function key to be programmed by pressing it. After the function key is
selected, the following display appears.
K#n Programming Mode
Edit Clear Exit
Note: n = function key #
If the operator pushes Function key 2, the display would read:
K#2 Programming Mode
Edit Clear Exit