5
6. Connect the external
power supply
(not
included)
to the circuit
board. The
recommended power
supply is 24 Vac, 50 VA.
(See Figure 6)
7. To mount your camera,
consult the section
Camera Mounting for
HEM Series Housings on
page 8. Begin with step
5. Then see UL-WBM &
UL-WB+BJ Wall Bracket
Mounting on page 10.
2.3
HEM10-BK BLOWER KIT WITH HEM10-HK/HEM12-HK
HEATER KIT INSTALLATION
This section contains instructions for installing the heater kit and
blower kit for HEM10, HEM10-01, HEM12 and HEM12-01
camera housings. While these kits are sold as add-on
components for the HEM10, HEM10-01, HEM12 and HEM12-01,
they are also available in a preassembled package. The
HEM10-03 and HEM12-03 are 10- and 12-inch camera housings
respectively with an installed sunshield, heater and blower.
1. If applicable, remove the sunshield by sliding it forward on
the main housing unit.
FIGURE 5
FIGURE 6
