Ultrak COE-08, Руководство пользователя

Страница: 16 / 28

2-2
2.1.1 JAD-832 Controller
If a JAD-832 Controller is connected directly to a COE unit, the JAD-832
must be plugged into a DIA-01 Control Interface Adapter and then the DIA-
01 connected to the input on the COE. The DIA-01 provides the +5V power
required to operate the JAD-832.
DIA-01 to COE Input
TX+ Black to +
TX- Red to -
2.1.2 MUX-05 Multiplexer
Up to five JAD-832 Controllers can be connected to a MUX-05 Multiplexer.
Four of the JAD-832 controllers must be plugged into a DIA-01 and then the
DIA-01's are connected to the inputs on rear panel of the MUX-05. One of
the JAD-832 Controllers can be plugged directly into the front panel of the
MUX-05. Then one of the MUX-05 outputs is connected to the COE unit
input.
MUX-05
Channel 2 through 8 Output
to COE Input
Pin 2, TX+ to +
Pin 1, TX- to -
Pin 3, GND to S