UltraGauge Blue, Руководство по установке и эксплуатации

Страница: 36 / 83

UltraGauge Screens

View Logs
______________________________________________________________________________________
Page 36/83
UltraGauge
Blue
™
User Manual www.ultra-gauge.com
Navigate
T
T
w
w
e
e
a
a
k
k
G
G
a
a
u
u
g
g
e
e
s
s
(Android Only—for Apple, double click on the gauge to adjust)

Tweak Gauges
Fine-tune gauge sizing/placement and much more…
Customization which can be performed:
For all Gauges:

Re-size
Set the width (in pixels) of the current gauge (height is auto-calculated)

Move
Set the X & Y pixel coordinates for the current gauge. This menu can be used to fine-tune the coordinates should you
want to closely align gauges relative to each other.

Order
Set the View Order from 1through # of gauges for the current gauge. The higher the number, the further “forward” the
current gauge will be brought. This is important if you want one gauge to be on top of another.

Background Visible
Make the background for the current gauge visible/invisible. Useful when you want to overlap gauges

Border Visible
Make the border for the current gauge visible/invisible
Note:
This field is valid if the Background of the current gauge is visible.

Rotation/Needle Start
Rotate the current gauge from 0 to 360
o
. For Analog gauges, this will be where the needle starts its sweep.
For Analog Gauges/Graphs only:

Min/Max Gauge Values
Sets the upper and lower boundaries for Analog gauges and graphs.
For Analog Gauges only:

Full Circle Gauge
If full circle is not checked, the area behind the current analog gauge will only appear where the gauge needle sweeps.
Can be useful when creating a ½ gauge where you don’t want the gauge background to appear in the bottom ½ of the
gauge (i.e. the area where the needle cannot sweep).

Needle Sweep
The number of degrees that an analog needle will sweep for the current gauge. For example, if you want a 1/2 gauge,
the Needle Sweep would be set to 180degrees (and you probably want to set the Rotation/Needle Start to 0
o
or 180
o
). A
negative Needle Sweep value will cause the gauge needle to sweep from right to left.
Navigate
Clear Gauges
(Android Only---For Apple Long press on Gauge Page Background)

Tweak Gauges

Un-assigns all gauges from all pages. Not commonly used. Can be used when it is desired to start a new.
Once unassigned the Gauge screens will show no gauges.
Navigate