NT 208D GB1
6 / 20
270
237
210
108
79
3 -
ERGONOMICS AND DIMENSIONS OF THE MINI 600 / 2000-2 CONVERTERS
Wall-mounted industrial version (IP 65 or 67):
The resources for cabling the 4 cables leading to the probes are provided by the
installation of double glands on a “Y” type with IP 65 protection level.
To preserve the MiniSonic index 67, an external extension box is necessary (optional
supply). (
Possibility also of a 316L St. St. enclosure with 4 glands for probes cables
).
F = Function
▼ = Choice (menu ou parameter)
+/- = Modification
N.B
.:
To facilitate the wiring on the probe cable, it is advisable to remove the “Y” box.
Version EXD ATEX (Ex d IIC T6 )
– IP 67 :
> See also the specific notice NT 219 B.
-.Each touch of the keypad has the same function as above.
- The two glands near the front are reserved for probe cables.
- These connections request the use of a double twin-ax from the MiniSonic to an Ex e or
Ex d connection box from where start the 4 cables to the probes.
- To do the internal wiring on MiniSonic, it is necessary to remove the front of the
MiniSonic board with its support. Remove the 3 screws which fix the front panel.
- The EMC is improved when cable screens or shields are earthed to the enclosure inside
the glands.
- After the internal connections are finished, earth the MiniSonic board support with the
green / yellow cable at the rear.
- The Enclosure itself must be earthed.
Weight =1.5 kg
Mat. = Alum.
Paint. = Epoxy
Fixing by 2 collars
on pipe
Fixing by 2 x
M5 Screws.
