ultracomfort Leisure UC211, Руководство по обслуживанию

Страница: 23 / 52

REVA_040412
22
Trouble Shooting with Smart Tek
Models: UC211, UC320, UC330, UC540-SAA, UC540-M, UC540-L, UC480, UC660, UC770,
UC550-S, UC550-M, UC550-L, UC552, UC556, UC551-S, UC551-M, UC551-L, UC553, UC557
Problem: Solution:
Chair doesn't work, both LED lights are off. 1. Check right angle plug is connected to the transformer.
2. Check the plug end of the transformer is plugged into the
wall outlet.
3. Check the fuse or breaker to the wall outlet the chair is
plugged into. If all above are ok, defective transformer
replace it.
Chair doesn't work, both LED lights are on. 1. Defective motor replace it.
Chair motor runs in one direction, both lights
on.
1. Defective hand control replace it.
Chair doesn't work; LED on hand control is
off.
1. Check the quick release connector is plugged in and
locked in the chair pocket.
2. Check the extension from the pocket is connected to
the motor.
If all above are ok, defective hand control or
extension wire, extension wire rarely goes bad,
replace hand control.
Models: UC540M-26
Problem: Solution:
Chair doesn't work, both LED lights are off.
1. Check right angle plug is connected to the
transformer.
2. Check the plug end of the transformer is plugged into
the wall outlet.
3. Check the fuse or breaker to the wall outlet the chair
is plugged into. If all above are ok, defective
transformer, replace it.
Chair doesn't work, both LED lights are on.
1. Check motors are plugged into the control box.
If all above are ok, defective control box or motors,
both motors rarely go bad, replace control box.
Chair motor runs in one direction, both lights are on.
1. Defective hand control, replace it.
Chair doesn’t work; LED on hand control is off.
1. Check the quick release connector is plugged in and
locked in the chair pocket.
2. Check the extension from the pocket is connected to
the control box.
If all above are ok, defective hand control or extension
wire or control box, extension wire rarely goes bad,
replace control box and hand control, replace hand
control first to see if problem is resolved.