10
Always wait until you have one location before
releasing the dog onto the terrain. This will enable
you to check the battery level and ensure that the
device is functioning flawlessly.
The signal quality between the collar and the host
device may be impacted by natural obstructions or
buildings. The signal will be best when there is an
unobstructed line of sight.
You can improve the signal by moving to a more
elevated area compared to the collar.
Do not bend the section between the electronic
casings beyond its natural curvature.
One Avius host device can connect up to 50 Avius
collars.
4. Starting up and using the device
4.1 Installing batteries
Charge the batteries before installing them into the
collar and host device.
Remove the covers of the battery compartments by
turning the covers counterclockwise. Insert a single
3.7 V 18650-sized Li-Ion battery into the battery
compartments of the collar and the host device. Take
note of the (+) and (-) symbols on the battery and the
battery compartments (Figure B and Figure C).
Close the covers to the battery compartments by
turning them clockwise. Do not overtighten the
covers!
4.2 Starting up the devices
Start up the host device by pressing the power
button on the host device (Figure D). A green LED
light on the host device will illuminate for three
seconds to indicate that the device is starting up.
If the host device’s battery is low, a red LED light will
illuminate for three seconds instead of the green
LED light.
Start up the collar by placing the magnet icon on
the host device (Figure E) near the power icon on
the side of the collar’s battery compartment (Figure
F). Hold the host device against the collar for a few
seconds and the green LED light on the collar’s GPS
compartment will illuminate for three seconds to
indicate that the device is starting up.
The collar and host device will pair with each other
the first time they start up. In the future, the devices
will establish a connection automatically when they
start up.
Take the collar outdoors so it can connect to the
satellites. While the collar is searching for satellites,
the green LED light will blink once a second. When
the collar has discovered a sufficient number of
satellites to provide an accurate location, the green
LED light on the collar will blink once every three
seconds.
4.3 Adding the Avius device to the
Ultracom application
The Ultracom mobile application is required
to use the device. Open your mobile device’s
application store (Android: Google Play, Apple iOS:
Apple App Store) and search the store using the
keyword “Ultracom”. Please note that the minimum
operating system of the mobile device must be at
least Android 4.0 or Apple iOS 8.0.
Download and install the Ultracom application. Start
up the application and proceed with registration.
You can find the full application manual from our
website www.ultracom.fi.
Open the Ultracom application on the mobile
device. Open the main menu and select “Add
Device…”. From the menu select “Avius”. On the
“Device ID” field input your Avius device ID number.
You can find the Avius device ID number on the first
page of this manual in the device type sticker. You
can also find the device ID number in a sticker under
the collar of the Avius device.
Input other necessary info like device name and
password to the application and select “Save”.
From the devices list select the Avius device that
you added. Activate the AviusLINK discovery and
give the application permission to start Bluetooth on
your phone. If the host device is not shown on the
Avius Discovery list, start the scan again by selecting
“Scan” on the screen.
Note!
Pairing of the Avius host device has to be
done only once. Pairing has to be done again if
the device pair has been removed from the mobile
device. In the future, the Avius host device and
your mobile device will establish the Bluetooth
connection automatically. Pairing is not necessary to
set up every time you use the device.
The blue LED light on the host device will blink once
a second until it is connected to the mobile device.
4.4 Changing the Bluetooth mode of the
host device
If connecting to the mobile device using the default
EN
Содержание AVIUS
