Page 10 of 12
After Each Use
⚠
WARNING
To avoid property damage, do not expose the monitor to excessive heat or cold. The storage
temperature of the camera is -30 to +70°C and the operating temperature is -20 to +50°C. The
humidity is Rh90%.
Maintenance
⚠
WARNING
Remove all the cable connections from the monitor before cleaning the unit.
Use a mild household detergent and clean the unit with a slightly damp, soft cloth. Never use
strong solvents such as thinner or benzene, as they might damage the surface of the device.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Monitor doesn
’t
display even
though the light is
on.
The screen displays the backlight mode.
Replace the monitor.
The monitor
’s PCB is broken.
Replace the monitor.
Monitor has a blue
screen but the light
is on.
The monitor to the camera wire is not
connected correctly.
Check the connection from the monitor to
the camera. Make sure the connection is
secure.
The backup camera is damaged.
Replace the camera.
Monitor does not
work. The light is
off.
The ON/OFF button has not been pressed.
Press the ON/OFF button to turn on the
monitor.
The working voltage for the monitor doesn
’t
match 9V-15V DC
Change the power to 9V-15V DC and turn
on the monitor.
Replacement Parts
For replacement parts and technical questions, please call Customer Service at
1-800-222-5381
.
Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
When ordering parts, the following information will be required: item description, item model
number, item serial number/item lot date code, and the replacement part reference number.
The distributor reserves the rights to make design changes and improvements to product lines
and manuals without notice.
