Ultra-tow 57762, Руководство пользователя

Страница: 22 / 28

Page 22 of 28
slot in the bearing is completely full of grease.

As you finish assembling the hub, be careful not to get any dirt or debris on any part of the
assembly.

Replace the dust hub cap over each bearing.
Hitch
Check the nuts, bolts, and other fasteners to ensure that the hitch remains secured to the tow vehicle
and the coupler remains secured to the trailer. The connection point may require periodic lubrication to
permit free movement of the coupler to the hitch ball.
Wiring
1. Make sure connector-plug prongs and receptacles, light bulb sockets, wire splices, and ground
connections are clean and shielded from moisture. Lightly coat all electrical terminal connections with
no conducting (dielectric), light waterproof grease.
2.
Clean the prongs with very fine sandpaper, being careful not to damage the contact area.
3. Turn lights off, and then clean the surface deposits in the connector holes. Try to clean off only the
deposits and lubricate lightly with dielectric, light waterproof grease.
Maintenance Chart
The following chart serves as a basic guideline for scheduling your trailer maintenance. Maintenance
may be different based on your local conditions, type of trailer, and frequency of trailer use.
⚠
CAUTION
All maintenance, service, or repairs listed in this manual are only to be attempted by a qualified service
technician.