Ultra-tow 57762, Руководство пользователя

Страница: 13 / 28

Page 13 of 28
9. The left tail light (10) and right tail light (11) are pre-wired but need to be attached to back of
fenders, along with the license plate bracket (12). The tail light wire pigtails run from the fenders
through the trailer body and connect to the wiring at the back of the drawbar. See Figure F.
⚠
WARNING
Use care to secure the tail light wiring inside the fenders and away from the tires.
10. Use a bolt (27) and lock nut (34) to mount the coupler (7) to the front of the drawbar.
11. Use bolts (24), nuts (34), rubber pads (39), and washers (29) to fasten the body bracket (19) to
the bottom shell (15) and then the bottom shell to the top of the trailer body.