Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future
reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become
familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be responsible for
issues arising from modification. We strongly recommend this machine is not modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted Northern Tool + Equipment to determine if
it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
This wheel chock fits most of the standard motorcycles currently on the market. It is designed to be mounted to a
truck bed, trailer or concrete floor.
TECHNICAL SPECIFICATIONS
Item Description
Construction
Formed Steel w/ Carbon Steel Hardware and Thermoplastic End Caps
Overall Folded Dimensions
20 1/2in.L
×
10 3/8in.W
×
13 1/5in.H (52
×
26.4
×
33.5cm)
Weight
16 lbs. (7.26kgs)
Moveable Chock Length
10in. (25.40cm)
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below may result
in serious injury.
WARNING:
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur.
It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
SAVE THESE INSTRUCTIONS
WORK AREA
•
Keep the work area clean,
free of clutter and well lit.Cluttered and dark work areas can cause
accidents.
Page of 6
2
