understood by the operator that common sense and caution are factors that cannot be
built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
•
Proper installation of this product requires the installer to have a good
understanding of circuitry.
•
If permanent mounting of the worklight on a vehicle is contemplated, the installer
MUST be sure that no vehicle components or other vital parts could be damaged
during the drilling process. Check both sides of the mounting surface before
drilling begins. Also de-burr any holes and remove any metal shards or remnants.
Install grommets into all wire passage holes.
•
Do not install this product or route any wires in the deployment area of your air
bag. Equipment mounted or located in the air bag deployment area will damage or
reduce the effectiveness of the air bag, or become a projectile that could cause
serious personal injury or death. Refer to your vehicle owner’s manual for the air
bag deployment area. The User/Installer assumes full responsibility to determine
proper mounting location, based on providing ultimate safety to all passengers
inside the vehicle.
•
Do not attempt to activate or control this device in a hazardous driving situation.
•
Do not use a pressure washer to clean this product.
•
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS
COULD RESULT IN DAMAGE TO THE PRODUCT OR VEHICLE AND/OR
SERIOUS INJURY TO YOU AND YOUR PASSENGERS!
WORKLIGHT
USE AND CARE
•
Do not modify the worklight in any way.
Unauthorized modification may impair
the function and/or safety and could affect the life of the product.
•
Always check damaged or worn out parts before using the work light.
Broken parts will affect the worklight operation. Replace or repair damaged or
worn parts immediately.
•
Store idle worklight.
If the worklight is not permanently installed, when the work
light
is not in use, store it in a secure place out of the reach of children. Inspect it
for good working condition prior to storage and before reuse.
