Cycle the Ignition Key
ON/OFF ON/OFF ON
(Leaving the key ON)
Press and release the
Program Switch 1 time.
HORN will chip to confirm
program mode entered
Press Unlock Button on
Remote to Select Menu 2
1 HONK
SETS OPTION 1 – SECURE VALET -
The LED/ Program Switch must
be held for 15 seconds to place the system into Valet Mode.
SETS OPTION 2 – STANDARD VALET-
The LED/ Program Switch must be
held for 5 seconds to place the system into Valet Mode.
SETS OPTION 1 – 30 SECOND-
The park light output will flash for all
functions and will stay active for 30 seconds when unlock is pressed.
SETS OPTION 2 –
Trunk Release-
The park light output will act as a
positive trunk output. The trunk output acts as a negative park light.
SETS OPTION 3 – Normal Operation-
The park lights will flash for all
alarm functions.
CHANGE SETTING 1 -
GOTO SETTING 2 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE HORN HONK(S)
CHANGE SETTING 2 -
PRESS & HOLD THE VALET SWITCH UNTIL THE HORN HONK(S)
GOTO SETTING 3 -
PRESS & RELEASE THE VALET SWITCH
1 HONK
1 HONK
2 HONK
2 HONK
3 HONK
DEFAULT SETTING
DEFAULT SETTING
STEP 2 - SELECT / CHANGE PROGRAM SETTINGS
SETS OPTION 1 – Pulsed Output-
The AUX output will pulse for .75 seconds when
activated.
SETS OPTION 2 –
Active Output-
The AUX output will stay active for as long as the
AUX button is held.
SETS OPTION 3 – Horn Output-
Horn output on the WHITE/BLUE wire.
CHANGE SETTING 2 -
PRESS & HOLD THE VALET SWITCH UNTIL THE HORN HONK(S)
GOTO BACK TO SETTING 1 -
PRESS & RELEASE THE VALET SWITCH
1 HONK
2 HONK
3 HONK
STEP 1 - ENTER PROGRAM MODE - MENU 2
SETTING 1 - VALET SETTINGS
THE HORN WILL HONK 1 TIME WHEN SETTING 1 IS SELECTED
PRESS
1 TIME
X1
1 HONK
SETTING 2 - PARKING LIGHT OUTPUT
THE HORN WILL HONK 2 TIMES WHEN SETTING 2 IS SELECTED
PRESS
2 TIMES
X2
2 HONK
SETTING 3 - HORN / AUX OUTPUT
THE HORN WILL HONK 3 TIMES WHEN SETTING 3 IS SELECTED
PRESS
3 TIMES
X3
3 HONK
DEFAULT SETTING
SYSTEM PROGRAMMING -
Menu 1
PAGE 12
KE-6
INSTALL MANUAL
PROGRAMMING
SYSTEM PROGRAMMING -
Menu 1
PAGE 13
KE-6
INSTALL MANUAL
QUICK VIEW CHART
1 SEC
1
LOCK DOORS
3 SEC
1
ACTIVATE PANIC
PRESS THEN
RELEASE THEN
PRESS & HOLD
1
ACTIVATE CONSTANT LOCK
OUTPUT **
LOCK
BUTTON PRESS
HONK /
FLASH
SYSTEM FUNCTION
BUTTON
1 SEC
2
UNLOCK DOORS
1 SEC
WHILE ALARM IS
TRIGGERED
NONE
TURNS OFF PANIC BUT DOORS
ARE STILL LOCKED
UNLOCK
PRESS & HOLD FOR 1 -
5 SEC
1
ACTIVATES AUX OUTPUT
** PROGRAMMABLE OUTPUT - CHECK WITH INSTALLATION CENTER FOR DETAILS
PRESS & HOLD FOR 3
SEC
ON
ACTIVATES CAR FINDER
PRESS TOGETHER
THEN RELEASE
PRESS TOGETHER
THEN RELEASE
1
2
ACTIVATES SILENT LOCK
ACTIVATES SILENT UNLOCK
+
NO HORN HONK - ACTS AS A TOGGLE - IF LOCKED WILL UNLOCK, IF UNLOCKED WILL LOCK
