background image

Panic Mode

Activating Panic Mode 

Press and hold the    button for three seconds. The park lights will begin to flash 
and the siren will activate. 

Disabling Panic Mode 

Press and release the    or    button to disable Panic.

NOTE: 

Panic mode will stay activated for sixty seconds.

Alarm Functions

1. Press and hold the    button. (The     button on the 606 series)
2. The park lights will flash and the siren will chirp 1 time.
3. The auxiliary output will stay activated until the button is released.

*Dealer programmable constant, latched or momentary output.

Auxiliary Output Ch 4* 

(optional)

1. Press and hold the    button. 
2. The park lights will flash and the siren will chirp 1 time.
3. The auxiliary output will stay activated until the button is released.

Auxiliary Output Ch 5

 (optional)

 (The     button on the 606 series)

NOTE:

 Auxiliary Output Ch 5 not available on the 670 series.

Trunk Release Ch 3

 (optional)

Press and hold the    button. The system will disarm, unlock the doors and 
continue to hold the    button until the trunk release activates. 
This will be confirmed by one park light flash and one siren chirp.

Note: 

The trunk release output will not activate when the ignition key is in the 

           “On” position.

OWNER’S MANUAL

                                                                                           PAGE 4

Содержание 606 Series

















Отзывы: