background image

PAGE 13                                                                                        

OWNER’S  MANUAL

To activate Car Jack Mode:

Type 1 (Door)-

 With the ignition key in the “On” position, open and close the 

door. The LEDs will begin to flash rapidly for 30 seconds. After an additional 30 
seconds the siren will begin to chirp on/off for 10 seconds, followed by full siren.

Type 2 (Ignition)-

 With the ignition key in the “On” position, turn  the ignition 

key to the “Off” position. The LEDs on the antenna will immediately begin to 
flash rapidly for 30 seconds, followed by the siren chirping on/off and then full 
siren.

Remote Transmitter*-

  With the ignition key in the “On” position press and 

release the 

#

 button. The LEDs will begin to flash rapidly for 30 seconds. After 

an additional 30 seconds the siren will begin to chirp on/off for 10 seconds, 
followed by full siren.

*Default setting, will activate Car Jack mode in Type 1 or Type 2

NOTE: 

If car jack mode  was accidently activated, within 10 seconds turn the 

ignition key to the “On” position, then press and release the Program Button.

To deactivate Car Jack Mode

1) 

Turn the ignition key to the “On” position, press and hold the program button

     for 20 seconds and turn the ignition key back to the “Off” position.

2)

 Enter 

Service Mode*.

 

3)

 Exit 

Service Mode*.

                                                                    *see page 14                                                             

Car Jack Mode

Содержание 606 Series

















Отзывы: