Installation Guide
Installation Guide
PROGRAMMING
PROGRAMMING
9
Press the Program Button 5 times
to select setting 5 (This will be confirmed by 5 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 7 times
to select setting 7 (This will be confirmed by 7 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 6 times
to select setting 6 (This will be confirmed by 6 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 4 times
to select setting 4 (This will be confirmed by 4 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 3 times
to select setting 3 (This will be confirmed by 3 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 2 times
to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 1 time
to select setting 1 (This will be confirmed by 1 LED flash)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Setting 1 - Service Mode (Valet Mode)
Setting 2 - Parking Light Output
Setting 3 - Horn Honk Timing - Pink wire on 3-pin white
Setting 4 - 4th Channel Settings- White/Green wire on 4-pin square
Setting 5 -Car Jack Mode
Setting 7 -Programmable Output - Green Wire on 3-pin white
Setting 6 - Horn / 5th Channel - Pink wire on 3-pin white
1 Pulsed 1 Flash Pulsed for 0.75 seconds upon 4th Channel Activation
2 Latched 2 Flashes Latched until repeated or ignition “ON”
*3 Active 3 Flashes Active for as long as buttons are held on Transmitter
1 Door & Button 1 Flash Car Jack is activated upon Button 4 or Door open while Ignition is “ON”
2 Door, Button 4 2 Flashes Car Jack is upon Button 4 or Door open or ignition “ON” and Ignition
*3 Car Jack OFF 3 Flashes No Car Jack Functions
1 LED Output 1 Flash The output will pulse (-) when armed for activation of an LED.
2 Low Crank 2 Flashes The output will come on (-) during crank duration.
*3 (-) Disarmed 3 Flashes Negative while disarmed.
1 5th Channel 1 Flash Pulsed output when activated by buttons #2 & #3 held for 2 seconds
2 Horn Honk 2 2 Flashes Horn Honk Output - Full Alarm ONLY
*3 Horn Honk 1 3 Flashes Horn Honk with Arm & Disarm Chirps
1 30 Second Park Lights 1 Flash Park Lights on for 30 seconds on disarm
2 Negative Park Lights 2 Flashes Switches the Park Light and the Trunk Release (3rd Channel) Outputs
3* Normal Parking Lights 3 Flashes 2 Park Light Flashes on disarm
1 5ms 1 Flash Short (Quiet) Pulses
2 20ms 2 Flashes Long (Loud) Pulses
*3 10ms 3 Flashes Normal (Medium) Pulses
1 Secure Valet Active 1 Flash Turn the ignition on and hold the Program Button for 15 seconds
2* Normal Valet Active 2 Flashes Turn the ignition on and hold the Program Button for 5 seconds
Note: To activate the 4th channel output, press and hold transmitter buttons #1 and #3 at the same time. The siren
will chirp once to confirm 4th channel activation.
Note: To operate the 5th channel, this setting must be programmed for setting #1. To activate the output press
buttons #2 and #3 together for two seconds..
1 Double Pulse Unlock 1 Flash Single .75sec.Lock pulse and double Unlock Pulse
2 3 Second Lock & Unlock 2 Flashes 3 second pulses for Lock & Unlock
*3 0.75 Second Pulses 3 Flashes 0.75 second pulses for Lock and Unlock
1 Ignition Lock & Unlock Enabled 1 Flash Doors Lock / Unlock when the key is turned On/ Off
2 Ignition Lock Only 2 Flashes Doors Lock when ignition key is turned ON only
*3 Ignition Auto Lock Disabled 3 Flashes Doors do not Lock or Unlock with Ignition key
1 Lock & Unlock chirps
Disabled
1 Flash Chirps for Panic and Car Finder Mode only.
2 Lock & Unlock chirps
Enabled
2 Flashes Chirps for Lock, Unlock, Panic and Car Finder Mode Only.
*3 All chirps enabled 3 Flashes Chirps for Lock, Unlock, Start, Panic and Car Finder Mode.
Press the Program Button 1 time
to select setting 1 (This will be confirmed by 1 LED flash)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 2 times
to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 3 times
to select setting 3 (This will be confirmed by 3 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 4 times
to select setting 4 (This will be confirmed by 4 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 5 times
to select setting 5 (This will be confirmed by 5 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Press the Program Button 6 times
to select setting 6 (This will be confirmed by 6 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button.
Press momentarily to move to next program step or repeat to change selection.
Setting 1- Ignition Auto Lock
Setting 2- Horn Honk Settings
Setting 3- Door Lock Options
Setting 4 -Sensor - Enable / Disable
1 Sensors Disabled 1 Flash Impact Sensors Disabled
* 2 Sensors Enabled 2 Flashes Impact Sensors Enabled - Normal Operation
1 Passive Arming 1 Flash System Auto Arms 30 seconds after last door is closed
2 Active Arming With Rearm 2 Flashes Auto-Arms if unlock is pressed and no door is opened within 30sec
* 3 Active Arming 3 Flashes Alarm Arms Only with Transmitter
1 No Auto-Lock with Passive Arm 1 Flash Doors do not auto-lock with passive arming
*2 Doors Auto-Lock with Passive 2 Flashes
DOORS LOCK WHEN PASSIVE ARMING
Setting 5 - Passive / Active Arming
Setting 6 - Active / Passive Locks
Press the Program Button 7 times
to select setting 7 (This will be confirmed by 7 LED flashes)
Press and hold the Program Button
until you receive the appropriate # of park light flashes and siren chirps.
Release the Program Button .
Press momentarily to move to next program step or repeat to change selection.
1 Short Pulses 1 Flash 125ms pulses with Unlock and on disarm output. (.125 second)
*2 Normal 2 Flashes
750ms pulses with Lock, Unlock and disarm output. (.75 second)
Setting 7 - Door Unlock & Disarm Pulse Duration
*See setting 7 for short unlock and disarm pulse durations
8
