SETS OPTION 1 – AUTO-LOCK & UNLOCK ENABLED-
The doors will lock when
the key is turned on and unlock the when the key is turned off.
SETS OPTION 2 – AUTO LOCK ONLY ENABLED-
The doors will lock when the key
is turned on but will not unlock when te key is turned off.
SETS OPTION 3 – AUTO LOCK DISABLED- The doors will not lock or unlock
when the key is turned on or off. (DEFAULT)
SETS OPTION 1 – HORN/ SIREN DISABLED-
The
HORN and SIREN and will
activate with Panic and Car Finder Mode only.
1 CHIRP
1 CHIRP
2 CHIRP
3 CHIRP
SYSTEM PROGRAMMING -
Menu 1
PAGE 16
95 SERIES
INSTALL MANUAL
PROGRAM MODE
CHANGE SETTING 1 -
GOTO SETTING 2 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
2 CHIRP
SETS OPTION 2 – HORN/ SIREN OUTPUT- The HORN and the SIREN* (alarm
models) output will activate for all functions. (DEFAULT)
SETS OPTION 1 – DOUBLE UNLOCK & SINGLE LOCK PULSE-
The system will
provide 2 unlock pulses w/unlock and 1 lock pulse w/lock.
1 CHIRP
SETS OPTION 2 - DOUBLE LOCK & SINGLE UNLOCK PULSE-
The system will
provide 2 lock pulses and 2 unlock pulses.
CHANGE SETTING 2 -
GOTO SETTING 3 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
CHANGE SETTING 3 -
GOTO SETTING 4 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
2 CHIRP
SETS OPTION 3 – NORMAL OPERATION- The system will pulse once for lock
and once for unlock. (DEFAULT)
3 CHIRP
CON'T ON NEXT PAGE
ENTERING PROGRAM MODE 1
ON/OFF - ON/OFF - ON
(Leaving the key ON)
IGNITION KEY
Press and release 1 time
PROGRAM SWITCH
1 CHIRP
Confirming
Program Mode
SIREN CHIRP
Press LOCK
Button to
Select Menu 1
REMOTE BUTTON
SETTING 1- IGNITION AUTO-LOCKS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
1 CHIRP
PRESS
1 TIME
1X
SETTING 2-HORN/ SIREN OUTPUT
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
2 CHIRP
PRESS
1 TIME
2X
SETTING 3-DOOR LOCK PULSES
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
3 CHIRP
PRESS
1 TIME
3X
SETS OPTION 1 - SHORT PULSES-
The output for lock and unlock is .25sec.
Helps
prevent windows from rolling up/down on some vehicles.
.
SETS OPTION 2 – LONG PULSES-
The output for lock and unlock is 3 seconds.
Used to activate vacuum door lock systems.
SETS OPTION 3 – NORMAL PULSES-
The output for lock and unlock is .75sec.
Used for most vehicles. (DEFAULT)
CON'T FROM PREVIOUS PAGE
SYSTEM PROGRAMMING -
Menu 1
PAGE 17
95 SERIES
INSTALL MANUAL
PROGRAM MODE
CHANGE SETTING 4 -
GOTO SETTING 5 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 4- DOOR LOCK TIMING
THE SIREN WILL CHIRP 4 TIMES WHEN SETTING 4 IS SELECTED
4 CHIRP
PRESS
1 TIME
4X
1 CHIRP
2 CHIRP
3 CHIRP
CHANGE SETTING 5 -
GOTO SETTING 6 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 5- AUXILIARY CHANNEL 1
THE SIREN WILL CHIRP 5 TIMES WHEN SETTING 5 IS SELECTED
5 CHIRP
PRESS
1 TIME
5X
1 CHIRP
2 CHIRP
3 CHIRP
CHANGE SETTING 6 -
GOTO SETTING 7 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
SETTING 6- AUXILIARY CHANNEL 2
THE SIREN WILL CHIRP 6 TIMES WHEN SETTING 6 IS SELECTED
6 CHIRP
PRESS
1 TIME
6X
1 CHIRP
2 CHIRP
3 CHIRP
SETS OPTION 1 – NEGATIVE IGNITION OUTPUT-
Output acts as a negative ignition
output. # Activates Car Finder Mode.*
SETS OPTION 2 – DOME LIGHT SUPERVISION-
The output will activate for
30seconds when unlock is pressed. # Activates Car Finder Mode.*
SETS OPTION 3 – AUXILIARY OUTPUT- Press and hold the # button to activate
auxiliary with unlock and disarm pulse. (DEFAULT)
SETS OPTION 1 – AUXILIARY OUTPUT-
The Auxiliary output will activate by
pressing and holding the unlock and start buttons together.
SETS OPTION 2 – 2nd UNLOCK-
The output will activate when the unlock button is
pressed twice within 3 seconds.
SETS OPTION 3 – SECOND ACCESSORY OUTPUT- output acts as a negative
second accessory output. (DEFAULT)
CON'T ON NEXT PAGE
*Car Finder Mode is not available on 2way models
.
