1. Serial Number
2. Cable/Webbing Length
3. Product Type
4. Product
5. Standard
6. Date of Next Inspection
7. Read the Instruction Manual
8. Date of Manufacture
9. Manufacturer
10. (SLE) Sharp Leading Edge
11. Approved for
Foot Level Drops
10
17. The max. working load of the person to be secured
is 136 kg. .
18. Fall arresters have to protected against the impact
of welding flames and sparks, fire, acidic
substances, alkaline substances and alike.
19. Do not apply any modifications or repairs to the
fall arrester . Repairs may only be carried out
by the manufacturer or persons trained and
authorized by the manufacturer.
20. Fall arresters may only be used by persons who
have been trained accordingly or have been
instructed by a competent person. The person
using the device shall not have any physical or
health impairments. (Alcohol, drug or medication
abuse, cardiovascular problems)
21.
The service life of the fall arrester has to be
determined during each annual inspection;
depending on wear, it is approx. 10 years.
22. The fall arresters of types HPS / HN / H which are
equipped with a hook clamp swivel mounting
should be attached to the anchor points in such a
way that no transverse or bending load can impact
the hook clamp swivel mounting. This is of
particular importance in case of a fall.
23. The fall arresting devices up to HPS 11 can also be
equipped with a special swivel (SW-type).
24. The suitability for use of a fall arrester with
horizontal fall protection in conformity with the
current standards should be verified by suitable
tests on the complete system.
INSTRUCTIONS FOR USE
SAFETY INFORMATION
10
9
9
10
Type
Setback Distance
US-HPS8
12 Inches
M2-HPSY8Y
US-HN8
16 Inches
US-HN10
US-HPS11
US-HN15
US-HPS20
US-HN15
20 Inches
US-HN20
US-HN30
US-HPS40
30 Inches
US-HN60
US-HN80
US-H110
Setback distance required for
horizontal use according to
ANSI/ASSE Z359.14-2014
ANSI Labeling
inches
0299
40
40
70 cm/30''
next inspection
40
40
202
1
20
22
WARNING: Follow all manufacturers
instructions included at the time of shipping.
Retractable type fall arrestor according to
ANSI/ASSE Z359.14-2014, Class B
The device must be inspected in accordance with the provided manufacturers instructions.
Max. free fall: 25-30cm/10-12”. See user manual for suitability with horizontal lifelines.
Remove from service if subject to a fall arrest or load indicator is deployed.
Only one user to be connected to this device at any time.
2339 N. 34th Dr., Phoenix, AZ 85009
Part #: US-HN60
Lifeline length: 40 ft
Lifeline Material: 3/16 in steel
Rated capacity: 300 lbs
Max. arrest distance: < 54 in
Average arrest force: ~765 lbF
Max. arrest force: 1,350 lbF
Serial No: 1234567
Manufacturing Date: 06/2020
3
5
6
7
9
1 2
8
4
10
11
Note:
Devices labelled with an ANSI type plate may only be sold
and used in countries in which the ANSI standard is recognized.
