X-Finity™ 2G Power Supply
Features
·
Dual 80mm Fans
· Low Acoustic Noise
· FlexForce Cabling Technology
· Connections Available
1 - 20/24 Pin Motherboard Connector
1 - 4/8 Pin +12V and EPS Connector
8 - 4 Pin Molex Connectors
2 - 4 Pin Floppy Power Connectors
2 - PCI Express Connectors
4 - SATA Connectors
1 - AST Controlled CPU Fan Connector
1 - AST Thermo-controlled Chassis Fan Connector
1 - PSU Fan RPM monitor Connector
· Meets ATX Version 2.03 and v1.2
· Short Circuit Protection
1-800-830-0051
www.ultraproducts.com
X-Finity 2G PSU - Featuring After Spin Technology
Specially designed for demanding, high end gaming systems, the X-Finity 2G
supplies up to 37A to the 12V rail. The 2G also features "After Spin Technology"
to help quiet the system and aid in prolonging the life of your components.
Connectors for chassis fans are thermostatically controlled; RPM's are reduced
when temperatures inside the case are low. PSU, chassis and CPU fan connectors
remain spinning several minutes after the PC is powered down allowing the
system to gradually cool down after use. The incomparable FlexForce cables are
dressed in a great looking titanium silver finish. Specially engineered cable
design promotes easy cable management and 30% better airflow than ordinary
cables by easily routing cable under the motherboard, behind drive bays...
anywhere that gets typically unsightly power supply cables out of the way of
airflow. 20/24-pin motherboard connection. 4-pin Molex connectors. 4-pin
floppy power connectors. PCI Express, SATA, 4-pin and 8-pin EPS connectors.
Versatile. Dependable. Affordable. The X-Finity FlexForce ATX power
supply.
Featuring
600 Watt X-Finity 2G - Titanium
Model: XF2G600TI Part #: ULT33120
UPC#: 022769331201
Weight: 6 lbs. Dimensions: 6x6.75x3.5"
Max Output
Current
Max Combined
Wattage
165 W
444 W 7.2 W 12.5 W
581 W
19.7 W
+3.3VDC +5VDC +12VDC -12VDC +5VSB
30A 25A
37A
0.6A 2.5A
600 W
OUTPUT
600 Watt
Total Output Power:
600W (Full Load, Nominal Input Voltage)
Efficiency:
79% Typical at Typical and Nominal Input Voltage
73% Typical at Full Load and Nominal Input Voltage
Input:
AC Input Voltage:
115V/230V
AC Input Frequency:
50-60Hz
AC Input Currents:
· 10A (RMS) for 115VAC input
· 6A (RMS) for 230VAC input
What is AST (After Spin Technology)?
After Spin Technology is used to quiet the system and aid in
prolonging the life of your components. Connectors for
chassis fans are thermostatically controlled; RPM's are reduced
when temperatures inside the case are low. PSU, chassis and
CPU fan connectors remain spinning several minutes after the
PC is powered down allowing the system to gradually cool down after use.
