Ultra Power UP6, Инструкция по эксплуатации, Страница: 15 / 20

SYSTEM SETTINGS MENU
Min Input Voltage: When the user take a battery as a input power
source, this setting can protect the battery not over-discharged. When
the charger detect the input voltage lower than the setting value, then
the charger will stop the current task and remind the user with showing”
DC IN TOO LOW”. For example, when using a 6S LiPo as a power
source, we can set this value at 21.0V to protect the battery not over-
discharged.
Volume: When setting the buzzer volume to OFF, the operation sound
will be shielded, but the error sound will not be shielded.
Power
D
istribution: The total AC input power is 160W, the default
power for each channel is 80W. The user can adjust the power for
CH1 and CH2, the total power CH1+CH2=160W.
13