Ultra Power UP6, Инструкция по эксплуатации, Страница: 14 / 20

SYSTEM SETTINGS MENU
Language
MAX Input Power
MIN Input Voltage
Power Distribution
Capacity Cut
Time Cut
Temperature Cut
Backlight
Volume
About
Factory Reset
Back
Adjustable from 50W-450W (if use DC or Battery input source)
English, French, German, Japanese, Simplified Chinese, Traditional Chinese
Adjustable from 9V-24V (if use DC or Battery input source)
Support power distribution
（
default 50
%-
50
%）
Terminates charge process when reach this value
Maximum capacity can be adjusted by user
Terminates charge process when exceeding time set by user
Battery temperature protection (external temperature cable is required)
Returns all settings to factory default values
Three options-High, Medium, Low
Four options- High, Medium, Low and Off
Software version and information
Return to last program or menu
Long press the CH1 roller wheel to activate the system setting menu.
Max Input Power: When the input power can not reach the charger'
s maximum working power requirement(450W), to ensure stable and
safe operation of the UP6, this value should be adjusted according
to the input power source used for the charger. For example, when
using a 20V/10A DC power supply, this value should be set to 200W
(P=U X I).The recommended DC power supply is 500W/20V or higher.
12