Ultra Power Touch UP120AC, Инструкция по эксплуатации, Страница: 20 / 24

SYSTEM SET UP
18
1
2
BATTERY TYPE
LiPo LiFe LiIon
NiMH NiCd Pb
SYSTEM PROGRAM BATT. METER
SYSTEM
INPUT LOW
REST TIME
LCD LIGHT
11.0V
KEY BUZZER
SAFETY
OPTION
BACK ABOUT
RESET
SYSTEM
10min
8 ON ON
RESET
SYSTEM
ITEM
KEY BEEP
BUZZER
LCD LIGHT
ABOUT
SELECTION
ON/OFF
ON/OFF
1-10
DESCRIPTION
The beep sounds at every time touching the screen to confirm
your action. The beep or melody sounded at various times
during operation to alert different mode changes.
The brightness of the LCD can be adjusted basing on
personal preference.
You can change SYSTEM SETTING, SAFETY OPTION settings when you enter
to setting program by touch "SYSTEM".
INPUT LOW
REST TIME 1-120 min
The battery is on the cyclic process of charge and discharge
can often become warm after charge or discharge period. The
program can insert a time delay to occur after each charge
and discharge process to allow the battery adequate time to
cool down before being subjected to the next process.
When touching “RESET SYSTEM” the charger will restore
factory default settings.
If this charger is powerd by vehicle battery, this setting is to
protect the vehicle battery from over-discharged. UP120AC
Touch will monitor input voltage during charging. When the
input DC voltage is lower than the voltage level you set here,
UP120AC Touch will stop charging and the beep will work to
alert user.
System information: model no., hardware version,
software version.