Ultra Power Touch UP120AC, Инструкция по эксплуатации, Страница: 17 / 24

1
2
Pb 2S 2.0A/-0.5A
CHARGE
DISCHARGE
2.40V
BACK
1.80V
1
2
DELTA PEAK
SENSOR
DISCHARGE
END VOLT.
3mV
BACK
1.10V
TRICKLE 100mA
NiMH 6S 4.0A/-3.0A
OPERATION DIAGRAM - SETTING, START, STOP
1
2
CHARGE
DISCHARGE
4.20V
BACK
3.20V
LiPo 6S 2.0A / - 2.0A
BALANCE
>
1
2
LiPo 6S 2.0A / - 2.0A
CELLS
MODE
CURRENT
6S
2.0A
MORE BACK START
If you want change termination voltage level, please touch “MORE” to go to
termination voltage level setting page.
ITEM SELECTION DESCRIPTION
This is the voltage level that UP120AC Touch will stop
charging the battery.
Intended ONLY for expert users and racers, completely at
their own risk, which allows LIPO and LIFE packs to be
charged in excess of recommended cell terminal voltages.
This is the voltage level that UP120AC Touch will stop
discharging the battery, and is shown as volts PER CELL in
the pack (not total pack voltage).
TERMINAL
VOLTAGE
CONTROL
(TVC)*
END VOLT
DISCHARGE
LiPo
Lilon
LiFe
4.18-4.3V/Cell
4.08-4.2V/Cell
3.58-3.7V/Cell
LiPo
Lilon
LiFe
NiMH
NiCd
Pb 3.0-3.3V/Cell
2.9-3.2V/Cell
2.6-2.9V/Cell
0.1-1.1V/Cell
0.1-1.1V/Cell
1.8V/Cell
WARNING! By setting the TVC to any POSITIVE SETTING above default value, you ACCEPT
ALL RESPONSIBILITY for DAMAGE to your battery, FIRE, INJURY, and any other loss which
may result. If you do not agree to accept all risk, DO NOT OPERATE YOUR CHARGER
UNLESS ALL TVC POSITIONS ARE SET TO DEFAULT VALUE!
1 5