Flushing Coating System
Always wear approved Nitrile gloves
when performing the coating flush.
Press
MACHINE SET-UP
.
Press
COATING PRIME
.
Press
VACUUM
button.
Chuck a lens on the suction cup over the
coating bowl.
Position clean container under the filter.
Disconnect the nut from the nylon elbow at
the bottom of the coating filter.
Point nut and tubing into clean container.
Press
COATING ON/OFF
button.
The coating will flow out of the tubing into
the container.
When reservoir is empty press
COATING
ON/OFF
button to turn off coating pump.
19