GENERAL INFORMATION
This equipment is designed and sold for commercial use only by personnel trained and experienced in
its operation and is not sold for consumer use in and around the home nor for use directly by the general
public in food service locations.
First and foremost, each crate should be examined before signing the Bill of Lading to report any visible
damage by the trucker in transit and to account for the proper number of crates. If there is apparent
damage, arrangements should be made to file a claim against the carrier. Interstate Commerce
Regulations require that the claim must be initiated by the consignee. Proper and secure storage
facilities should be arranged for the oven(s) if necessary to protect it from outdoor or damp conditions
at all times before installation.
-IMPORTANT-
When you have all the crates unloaded, open the crates and remove all plastic covers. Inspect at once
for concealed damage. If anything appears to be damaged, contact the appropriate persons immediately
to file a damage claim. After completing this inspection, finish unpacking the oven.
Be sure to remove
all paper protection and packing material from the unit prior to lighting.
FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
The installation of the Appliance must conform to the NATIONAL FUEL GAS CODE
"ANSI Z223.1 - LATEST EDITION" AND ALL LOCAL GAS COMPANY RULES AND
REGULATIONS.
IN CANADA INSTALLATION SHALL BE IN ACCORDANCE WITH THE CURRENT CAN/
CGA-B149.1 NATURAL GAS INSTALLATION CODE OR CAN/CGA-B149.2 PROPANE
INSTALLATION CODE AND LOCAL CODES WHERE APPLICABLE.
NOTICE
This appliance must be installed with a stand and casters designed by Star Manufacturing as part of a
complete installation. The installation must also include a connector complying with either ANSI Z21.69
or CAN/CGA-6.16 and a quick-disconnect device complying with either ANSI Z21.41 or CAN1-6.9. It
must also be installed with restraining means to guard against transmission of strain to the connector
as specified in the appliance manufacturer's instructions.
For your protection, we recommend a qualified installing agency install this appliance. They should be
familiar with gas installations and your local gas requirements. In any case, your gas company should
be called to approve the final installation.
This appliance, its pressure regulator, and its individual shutoff valve must be disconnected from the
gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2
PSIG. This appliance and its pressure regulator must be isolated from the gas supply piping system by
closing its individual manual shutoff valve during any pressure testing of the gas supply piping system
at test pressures equal to or less than 1/2 PSIG.
4
CAUTION
Содержание UM1854-NATX-LP
Страница 25: ......
