RESTRAINT REQUIREMENT
1. The installation shall be made with a gas connector that
complies with local codes for connectors for movable
gas appliances and a quick-disconnect device that
complies with local codes for such devices in use
with gas fuel.
2. The installation of the restraint must limit the movement
of the oven(s) without depending on the connector,
the quick disconnect device, or associated piping to
limit the oven movement.
3. If the restraint must be disconnected during
maintenance or cleaning, it must be reconnected after
the oven has been returned to its originally installed
position.
OPERATING INSTRUCTIONS
DO NOT ATTEMPT TO OPERATE THE OVEN until
connection of utility service and installation has been fully
inspected (start-up check-out) by an authorized service
technician or a Star Service Technician in order to assure
the oven is properly installed and in working order.
The
warranty becomes effective upon verification of
proper installation.
CAUTION
DO NOT WORK AROUND THE CONVEYOR
BELT WITH LONG HAIR, LOOSE CLOTHING,
OR DANGLING JEWELRY. GETTING
CAUGHT IN THE BELT COULD RESULT IN
DISMEMBERMENT OR FATAL INJURY.
Unless specified otherwise, conveyor travel is factory
set for left to right operation when facing the front of the
oven. If a direction change is required, refer to "DISPLAY
INFORMATION," section 3 for instructions on how to
program the controller for a direction change. In addition,
the conveyor belt must be changed to travel in the new
direction.
SAFETY OPERATING INSTRUCTIONS
The information contained in this section is provided
for the use of qualified operating personnel. Qualified
operating personnel are those who have carefully read
the information contained in this manual, are familiar
with the functions of the oven and/or have had previous
experience with the operation of the equipment described.
Adherence to the procedures recommended herein will
assure the achievement of optimum performance and
long, trouble-free service.
10
Содержание UM1854-NATX-LP
Страница 25: ......
