Software Upgrade Procedure
Chapter 7: Maintenance
Page 7-10
VersaMux-4000 Operation & Installation Guide
Part No. 24001157
Revision C
Software Upgrade Procedure
The VersaMux-400 has the capacity to accept software upgrades.
C
ontact DNE Technologies, Technical Support at(203) 265-7151 x400 or
(800) 370-4485 x400 for upgrade files and availability.
Use the following procedure to upgrade the software on the VersaMux-4000:
1.
Start a HyperTerminal session and connect a serial cable from the
computer to the control port on the back of the VersaMux-4000.
The HyperTerminal settings for the connection are (as shown in
):
•
Bits per second:
=
9600
•
Data bits:
=
8
•
Parity
: =
None
•
Stop bits:
=
1
•
Flow control:
=
XON/XOFF
Figure 7-6
HyperTerminal Setting for the VersaMux-4000 Terminal Interface