EMC DESCRIPTIONS
The EMC declaration according to the requirement of EN 60601-1-2
Cautions:
User must regard EMC, please install and put in service
K-020
according to the EMC
information provided in the accompanying documents.
Portable and mobile RF communications equipment can affect medical electrical
equipment.
The performance of the EQUIPMENT and SYSTEM that was determined to be essential
performance.
Table 201-Guidance and manufacturer’s declaration-electromagnetic emissions-for
K-020, as following table.
Table 202-Guidance and manufacturer’s declaration-electromagnetic immunity -for
K-020, as following table.
Table 204 -Guidance and manufacturer’s declaration-electromagnetic immunity -for
K-020, as following table.
Table 206 Recommended separation distances between portable and mobile RF
communications equipment and
K-020, as following table.
Table 201
Guidance and manufacturer’s declaration – electromagnetic
emissions
The
K-020
is intended for use in the electromagnetic environment specified below. The customer
or the user of the
K-020
should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The
K-020
uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The
K-020
is suitable for use in all establishments, including
domestic establishments.
Harmonic
emissions
IEC 61000-3-2
Not applicable
Voltage
fluctuations /
flicker emissions
IEC 61000-3-3
Not applicable