•
TESTING:
Place
entire
light
in
a
dark
room.
Light
should
turn
on,
if
not,
swipe
the
magnet
over
the
solar
panel
until
light
turns
on.
•
Run
times
will
vary
significantly
based
on
factors
such
as;
Sun
Exposure,
Season,
Angle
of
Sunlight,
Geographic
Location,
Shading,
Installed
Location/Position,
Battery
Condition,
and
most
importantly,
the
Brightness
Setting
in
comparison
to
the
yearly
season.
•
The
following
run
times
should
only
be
used
as
a
general
reference
and
are
not
guaranteed.
Consider
your
local
environment
•
Lower
brightness
settings
use
less
power
and
leave
more
reserve
power
for
cloudy
days
where
less
recharging
takes
place.
NOTE:
RUN
TIMES
ARE
BASED
ON
A
FULL
CHARGE:
MANY
FACTORS
MAY
PREVENT
A
FULL
CHARGE
SEE
BELOW
Wave
the
magnet
over
the
solar
panel
at
NIGHT
until
you
find
the
activation
area
which
changes
the
brightness
level.
This
operation
only
works
at
NIGHT
or
in
absence
of
light.
Make
a
quick
up
&
down
motion
over
this
area
to
change
between
brightness
levels
&
OFF.
NOTE:
moving
too
slowly
may
activate
the
magnet
switch
multiple
times
going
through
multiple
levels
at
once.
A
quick
motion
will
help.
BRIGHTNESS
SWITCH
4
‐
Season
Rated
!
Adjustable
Power
&
Run
Times.
SOLAR POST CAP
Hold
or
place
the
magnet
on
top
of
the
solar
panel
activation
area
for
at
least
5
‐
seconds:
After
5
seconds
the
illuminating
color
will
change:
Repeat
process
to
cycle
between
White
/
Blue
/
Amber
LED
illuminating
colors.
If
process
did
not
work
ensure
the
magnet
is
close
enough
to
the
activation
area.
Operation
only
works
at
NIGHT
or
in
absence
of
light.
After
desired
color
is
achieved:
use
a
quick
up/down
motion
over
the
activation
area
to
set
the
desired
brightness
level
&
run
time
shown
in
the
previous
step.
COLOR
CHANGING
SWITCH
Change
illuminating
colors
on
the
fly!
5
6
Ultra Bright Technologies 1-Year Limited Warranty
The retailer warrants the Solar Lights to be free from defects in workmanship and material present at time of shipment from the factory for a period of one year after the date of purchase by the original
purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned to the retailer. To obtain warranty service, you must
present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are you responsibility. Damage to any part such as by accident or misuse or improper installation or
by affixing any accessories, is not covered by this warranty. There is no other express warranty. The retailer hereby disclaims any and all warranties, including but not limited to, those of merchantability
and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty, which cannot be disclaimed, is limited to the time period as specified in the express warranty.
Some states do no allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages
arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damage, so the above
exclusion or limitation may apply to you. This warranty gives specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
TIPS
&
TRICKS:
If
you
purchased
multiple
units
place
multiple
magnets
together
creating
a
stronger
magnet.
This
will
help
increase
the
size
of
the
activation
area
and
allow
you
to
activate
the
switch
further
from
the
light!
PRODUCT
&
WARRANTY
REGISTRATION:
Visit
www.ultrabrighttech.com/registration