12
T
he VL1.1 dipole is provided with a specific aluminium square mast which simplifies the assembly of the
dipole on your mast and provides better support for all parts compared to an installation on round Mast. The
VL1.1 is the only antenna where the main hardware parts are pre-installed by UltraBeam, you only have to
complete the installation of the elements and the tie rods.
The installation procedures of the elements are identical to those indicated for the VL-Series so refer to these
manuals pages: 2-5-6-7-8-9 and "Standard Manual" (page 5) for elements assembling
NOTE:
All bolts of the parts pre-installed by UltraBeam have been already tightened correctly, do
not further tighten!!
As for all models it is recommended to correctly read the installation instructions.
UltraBeam will not be liable for malfunctions or damage caused by your setup!!
UP
bolt for truss
U- Bolts mast
