ultimatte dv, Руководство пользователя

Страница: 15 / 23

15
FRONT PANEL CONTROLS
•
Press the button for the desired control adjustment until the LED is lit.
•
Turn the Rotary Knob clockwise to increment the control amount or turn counter-clockwise to decrement the control amount.
•
Turn the knob slowly for fine adjustments.
•
Turn the knob quickly for coarse adjustments.
•
Position is indicated by the illuminated portion of the ring light. Minimum light indicates minimum control position and maximum light
indicates maximum control position.
•
Press the button again until the LED is unlit to “lock” the control in place thereby avoiding accidental adjustments.
ON-SCREEN DISPLAY CONTROLS
•
Backing Color: Blue, Green
•
FG Input: Turn the knob until the desired foreground input is selected ( S-Video , Video , Digital (DV)).
•
BG Input: Turn the knob until the desired background input is selected ( S-Video , Video , Digital (DV)).
•
Power Up Mode: Turn the knob to select Factory or User (if saved) power-up settings. If User is chosen, controls and inputs will be restored to
the user saved settings (see Settings below) on power up. If Factory is chosen, controls will be restored to factory defaults and inputs will be
restored to their state at last power down.
•
Settings: Turn the knob to select Save to save user defined defaults. Select Load to load previously saved user defined defaults.
•
Exit: Exits the main menu using the chosen settings.
•
Cancel:
Exits the OSD menu with no change.
Warning
Video is always available on both the S-Video and Composite outputs. Video is only available on the Digital Video output if not chosen
as an input in the configuration menu. If no video is seen through the Digital Video output, then it is most likely that Digital Video has been chosen
as a foreground or background input. Temporarily use the S-Video or Composite output in order to ensure
Digital Video is not selected for either FG
Input or BG Input.