T2-602 • T2-604 • T2-5001
T2-SERIES
Overview
Introduction
Ultimate Sound has gone back to the drawing board when designing this completely new amplifier series.
Keeping performance and budget in mind, our engineers have delivered on maximum wattage for minimum
dollar! And knowing that showing off your gear is as important as being heard down the street, we were sure to
pay equal attention on style and functionality. After all, we want you to have an ultimate car audio system.
Ultimate would like to thank you for purchasing its products.
CAUTION
This device is a high power, audio amplifier. Proper and careful usage of this product will provide many years
of enjoyment. Being exposed to very loud music can result in temporary or permanent hearing loss. Misuse or
improper installation will shorten the life of your product, and/or result in damage to the vehicle electrical
system. Please ensure you read this manual completely for procedures on how to properly install this unit.
Description
The completely new T2 amplifier series is engineered to deliver powerful, undistorted sound. Using proven
MOSFET technologies and manufacturing processes such as surface mount components, we strive for product
reliability and strict standards in quality control. Our amplifiers are driven through rigorous load tests to ensure
they operate under the most stressful of conditions. After all, we know you will!
MOSFET technology assures your amplifier satisfies the voltage and current demands of today’s systems. And
with ultra low distortion, they will deliver clean, crisp sound to your speakers and subwoofers.
Stability is essential in delivering a clean output signal, especially when your speaker system drops below nor-
mal impedance levels. Our dynamic full-range Class AB amplifiers will operate safely into 2 ohm loads, without
causing distortion to get out of control. All while reproducing a wide frequency response.
Our ground-pounding Class D amplifiers will operate safely into 2 ohm loads, and can be summed for those
power hungry subwoofer systems. Operating at these loads will generate lots of heat. So we’ve engineered the
heat sink to dissipate that heat effortlessly, while keeping your tunes pumping hard!
Professional setup of your audio system to get the right sound is an absolute must. With tri-mode crossovers
and continuously variable frequency control, you can tweak your system for optimum speaker performance. We
LOVE a great sounding car audio system too!
