ULTIMATE SPEED 88798, Инструкции по эксплуатации и безопасности

Страница: 8 / 30

8 GB
Start-up / Cleaning and Care / Storage / Disposal / Technical data Safety instructions for road safety / Start-up
Safety instructions for
road safety
In order not to jeopardise
road safety, observe the following
points:
· When using in vehicles, make sure that safety
devices, side airbags in particular, are not
compromised.
· If you have any question about the airbag,
read the vehicle‘s Owner‘s Manual or ask at
your local workshop.
AVOID DAMAGE TO THE
SEAT COVER!
Please ensure that you:
· connect the seat cover only to the voltage in-
dicated in the Technical Data,
· do not switch on the seat cover if it is folded
or bunched up,
· do not cause any sharp creases in the seat
cover,
· do not place any objects, e.g. suitcases or a
washing basket, on the seat cover when it is
switched on.
This can damage the seat cover.
Start-up
Attaching the seat cover
Place the seat cover on the car seat.
Pull the fastening strap
7b
of the seat cover over
the head rest of the car seat.
Carefully attach the seat cover using faste-
ning straps
7a
.
7b
7a
Note: If your vehicle has a side airbag, ensure
when attaching the seat cover that the fastening
strap
7b
is pulled only over the frame of the hea-
drest and not over the top part of the car seat.
7b
Switching on / off / Selecting
the fan speed
When using for the first time, first connect
the
12 V adapter
3
or the mains adapter
4
to the seat cover by attaching one of them to
the connection socket
2
.
Plug the mains adapter
4
into a 230 V socket
or the 12 V adapter
3
into the 12 V connector
in your car.