Fitting:
1. Take the car cover out of the storage bag.
2. Make sure which part goes on the front of the
vehicle!
You can identify the front by the sewn-on
label with the word "FRONT" on it.
3. Remove the strap by undoing both clip fasteners.
4. Fold in wing mirrors if possible.
5. Attach the car cover to the front of your vehicle
by using the sewn-in rubber strip.
6. Pull the car cover over the vehicle (Figure 1).
Attention:
If your vehicle has a rod aerial
at the rear, please unscrew it. Please push in
telescopic aerials. Please carefully push down
any aerials in the front roof area and lay them
parallel to the roof. Make sure not to damage the
aerial or the paintwork!
7. Now attach the car cover to the rear of your
vehicle by using the sewn-in rubber strip.
8. Lastly attach the strap on one side with the clip,
pull the strap under the vehicle, attach it to the
second clip and pull the strap tight (Figures 2+3).
300542_DE_AT_CH_BB_IE_NI_FR_BE_NL_CZ_ES_PT_Autovollgarage_LB8_RZ_180411.indd 9
12.04.18 07:27
