background image

 

Issue 3: 20/04/20 

                                                                                                                                                           Page 

15

 of 

32 

 

8. 

Operations  

 

8.1  Before using the bed 

• The wheels of the bed are locked: 
 

How to lock the brake: 

Press the lower lever down with your foot until the upper lever snaps up.  

How to unlock the brake: 

Press the upper lever with your foot until the lower lever clicks. 

 
 

 

 
• The power supply is compatible with the bed (230 Volt, 50 Hertz).  
• The power cable is plugged in and placed in such a way that it cannot be damaged.  
• The power cable, the motor cables and the hand control cable are not damaged by any moving parts 
of the nursing bed.  
• There are no obstacles in the way such as bedsides or chairs.  
• All control functions have been accurately inspected and are working properly.  
• Only after having carried out the above operations it will be possible to start using the bed.  
 

8.2  Requirements of onsite installation 

• Make sure there is enough space to allow the whole range of adjustments of the bed. There should 
not be any furniture or other objects close to the bed such as window sills.  
 
• If the bed is to be used on parquet floor, make sure that the use of wheels will not cause any 
discolouring due to the parquet waterproof treatment. It is possible to use the bed on tiles, carpets, 
laminated floors and linoleum.  
 
• A 230 volt power outlet, correctly installed, must be located as near as possible to the bed.  
 
• If there is the need to use other accessories (such as compressor systems etc…), make sure they 
are correctly fixed and that they work properly. In particular, make sure all different cables are safely 
connected. In case of questions or doubts please contact the manufacturer of such accessories.  
 
• If possible, use only non-flammable mattresses and linens.  
 
• Don’t smoke while in bed as there is no guarantee against risks caused by smoking tools (such as 
lighters, matches) depending on the mattresses and linens used.  
 
• Do not use any electric accessories (electric blanket) and appliances (lights, radios) only if they are 
in a good condition.  

Lower Lever 

Upper Lever 

Содержание Soprano Bariatric

































Отзывы: