Ultimaker Original, Руководство пользователя, Страница: 24 / 35

24
D Navigation and basics functionalities
Use of the Ultimaker controller display
3. When you have selected >Control -> you will proceed to the next sub-menu where you
will ind a variety of settings that can be used to control your Ultimaker Original
4. When there is no card inserted this function will indicate >No Card ->. When you have
selected >Print from SD -> you will access a sub-menu where all the Gcodes on your SD-
card will be visible.
Temperature: In this sub menu you can change several settings that inluence the tempe
rature of your Ultimaker Here you can change the nozzle and bed temperature and fanspeed
Motion:
Only make changes in the Motion menu if you know what you are doing. More can be
found at our wiki page (http://wiki.ultimaker.com/)
Store memory:
Save the settings you have changed in the control menu.
Load memory:
If you ever made and saves any changes in the settings, this option allows
you to load them.
Restory failsafe:
Restore failsafe will reset your UltiController to its Original settings. All
the settings you previously changed will be deleted.
Firmware version: Here you can see what the current irmware version is on your Ultima
-
ker Original.