Ultimaker Original, Руководство пользователя, Страница: 10 / 35

10
The irst run wizard
First use of your Ultimaker Original
4.
In the next coniguration steps we want to
do some check ups on your Ultimaker Original.
Make sure before doing these checks you have:
- Connected the usb cable
- The printhead is in the middle of the frame
[1]
- The build plate has some distance from the
nozzle minimal cm
[2]
NOTE: with the Heated bed the build plate might
look diferent the checks are still the same
5. Please select the [Run Checks] function.
Now Cura connects with the electronics and
tests some of the internal communication.
Cura will also perform a temperature check to
see if it functions correctly
6.
fter the temperature check has inished ura
will check your end stops. End-stops determine
the maximum motion size
Make sure that you move the printhead in the
direction of every indicated end stop.
7.
When the wizard asks you to
check on the
right front switch (x axis) gently move the print
head in this direction till you here a click and
Cura gives you the next command.
[1]
[2]
NOTE:
Some steps during the endstop checks may be diferent if you have an Ultima
-
ker O