ULTIM8 FITNESS Active8, Руководство пользователя

Страница: 11 / 15

D). Be careful not to tighten the running belt tension too much as you can create excessively pressure
on the front and rear roller bearings. An excessively tightened running belt may damage the roller
bearings that would result in bearing nosie from the front and rear rollers.
TO DECREASE THE TENSION ON THE RUNNING BELT, TURN BOTH BOLTS
COUNTERCLOCKWISE THE SAME NUMBER OF TURNS.
CENTERING THE RUNNING BELT
When you run, you may push off harder with one foot than with another. The severity of the deflection
depends on the amount of force that one foot exerts in the relation to the other. This deflection can
cause the belt to move off-center. This deflection is normal and the running belt will balanced or no
body is on the running belt. If the running belt remains consistently off-center, you will need to center
the running belt manually.
A). Start the treadmill without anyone on the running belt, press (SPEED UP ) button until speed
reached 6 kph.
B). Observe whether the running belt is toward the right or left side of the deck.
a. If toward the left side of the deck:
Using wrench, turn the left adjustment bolt clockwise 1/4 turn and the right adjustment bolt
counterclockwise 1/4.
b. If toward the right side of the deck:
Using wrench, turn the right adjustment bolt clockwise 1/4 turn and the left adjustment bolt
counterclockwise 1/4.
c. If the belt is still not centered, repeats the above steps until the running belt is on center.
C). After the belt is centered, increase the speed to 16kph and verify that it is running smoothly. Repeat
the above steps if it is necessary.
If the above procedure is unsuccessful in resolving the off-center, you may need to increase the belt
tension.
CARE & MAINTENANCE
CARE & MAINTENANCE
Always remove the key and unplug the power cord before cleaning, lubricating, or performing any
maintenance.
RUNNING BELT AND RUNNING DECK LUBRICATION
Regular maintenance is necessary for best performance and longer treadmill life. The maintenance
procedure will prevent premature wear of the running belt, running deck and drive motor system. It is
difficult to predict exactly when will need lubrication, we recommend the following time table as a guide
to lubricate:
USAGE PERIOD LUBRICATION
Light user Less than 3 hours / week Annually
Medium user 3~5 hours / week Every 6 months
Heavy user More than 5 hours / week Every 3 months
Please contact your dealer for ordering lubricant.