Ultenic H8, Руководство пользователя, Страница: 10 / 49

How to clean the transducer:
Clean with clean water or citric acid if there is scale in it.
Brush off the scale from the surface.
Rinse the transducer with clean water.
How to clean ceramic filter
Trouble Shooting Guide
Trouble Shooting Guide
If any trouble is found in normal operation, please kindly refer to the following points:
Trouble Possible reasons Solution
Power lamp off,
does not work
No power supply
Connect power supply,
switch on
Power lamp on, no
mist outlet with wind
Abnormal smell mist
1. New unit
2. Dirty water or water
sitting too long
1. Take out water tank, open cover,
let it stay 12 hours in cool position
2. Clean water tank, fill with clear
water
1. No water in water tank
2. Security switch is too loose
1. Fill water into water tank
2. Tighten the switch
Power lamp on,
unit doesn’t work
Too much water in the water tank
Pull out same water from the water
tank, close the cover of water tank
tightly
Mist fog is too low
1. Too much scale in the water tank
2. Water is too dirty or water kept
too long in the tank
1. Clean transducer
2. Clean water tank, change to
fresh clear water
Abnormal noise
1. Resonant in water tank when
water is too low
2. Unit is on a unstable surface
1. Fill water into water tank
2. Move the unit to a stable flat
surface
Mist fog coming out
from around nozzle
There are apertures between the
nozzle and water tank
Dip the nozzle in water for a while
and then fix it to the socket on
water tank
Do not dispose this product as unsorted municipal waste, collection of such waste separately for
special treatment is necessary.
DISPOSAL
1
2
3
1
2
3
Clean and activate the ceramic ball filter after using 1000L water regularly. Depend on water
quality. If ceramic ball is dirty, it needs to be cleaned more frequent.
It can be dipped in vinegar about 5 minutes. Then rinse it cleanly with clean water.
Then put filter under the sun for 4~6 hours.