NOTE:
the fabric or HEPA filter is suitable for dry vacuuming only, while the sponge
filter is suitable for wet vacuuming only.
3.3.
Working with the device
Use the on/off switch on top of the device to turn the device on or off:
Once the tank or bag is full, stop further vacuuming until the tank or bag is emptied.
To do this, turn off the device (set the power switch to the "O" position), unfasten
the two clamps connecting the top of the device to the tank. Then remove the drive
module from the tank gaining access to the tank itself or (optionally) the bag. If the
device will no longer be used, you can also clean the filter and the inside of the
tank.
IMPORTANT:
the device has a safety device on the bottom of the drive module
informing about a full water tank - if the tank is full, the suction power will
Содержание EASY FLOORCLEAN V10
Страница 62: ......