Maintenance Manual
UL
POWER
UL390i UL390i
S
UL390i
SA
MM 390A01 Revision No: 2
Date:
2014-09-15
Page:
15
of
18
not set correctly. Adjust according to aircraft manual or manufacturer. Otherwise loosen throttle
lever stop screws (3) with a 2.5mm Allan Key and move throttle lever stop (1) a few mm towards
the right. Tighten throttle lever screws (3) and test engine idle. Idle rpm will probably be too low;
readjust as described above.
Note:
Do not leave throttle lever stop screws (3) loose while engine is running to test idle speed.
Propeller flange bolt torque check
1. Unscrew the M6 screw with an allen key
dimension 3.
2. Remove the locking plate. Use a M6-bolt to
pull out the plate.
3. Attach the propeller flange holder (T063002)
to the prop flange with M14 bolts.
4. Torque the bolt to 300 Nm while holding the
prop flange. ( right hand thread )
Содержание UL390i
Страница 1: ...UL39Oi UL39OiS UL39OiSA Maintenance Manual MM 390A01 Revision No 2 Date 2014 09 15...
Страница 2: ......
