IMPORTANT:
Any safety provisions as directed by the appropriate governing
agencies must be observed when using our products.
The pictures in this document are snapshots of situations at
different stages of assembly, and therefore are not complete
images. For the purpose of safety, they should not be deemed
as definitive.
All instructions regarding safety and operations contained in
this document, and the data on stress and loads must be
respected. ULMA Construction
’s Technical Department must
be consulted any time that field changes alter our equipment
installation drawings.
The loads featured in this document, related to the basic parts
of the product, are approximate.
Our equipment is designed to work with accessories and parts
produced by our company only. Combining such equipment
with other brands is not only dangerous without having made
all corresponding verifications, it also voids any or all our
warranties.
The company reserves the right to introduce any modifications
deemed necessary for the technical development of the
product.
“Original document” produced and approved by ULMA Construc
tion.
All rights reserved.
Neither the whole nor any part of this document may be reproduced or transmitted in any form or by any means (electronic or
mechanical), including photocopy, recording or any other form of information storage or retrieval system without the permission of
ULMA Construction.
© Copyright by ULMA C y E, S. Coop
Information note
Safety note
Warning note
Control note
