16
KSP SHAFT PLATFORM
There are three different connection types between
main platform and cone recovery platform:
•
Connection by BRIO standards
•
Connection by push-pull props E
•
Connection by DW15 tie rods
•
Connection by BRIO standards:
B
RIO HEAD/DU and BRIO scaffolding standards are
used for this solution:
In these cases the best option is to preassemble BRIO
HEAD/DU
on the main and cone recovery platforms.
Once the platform is lifted, BRIO standards can be
assembled.
BRIO HEAD/DU are
fixed to the walers by means of
pins E20x70 and cotter pins R/5
It is recommended to brace the BRIO standards with
tubes and couplers.
Once the beams are assembled and before covering the
platfor
ms with boards, BRIO HEADS/DU have to
be fixed in the
holes indicated in the assembly drawings.
The heads are fixed to the walers with E20x70 pins and R/5
cotters pins.
