•
Select in the list which signal you want Output 2 (5 amps or 60W @
12V) to follow. If you have nothing connected to Output 2, set it to
Inactive.
•
You can use the "Force on" & "Force off" function to check that you
have connected your lighting correctly, but remember to select
"Follow signal" and press Save in the upper right corner before
completing the installation.
•
Perform a function test of the entire installation. Remember some
features such as automatic high beam may not work unless it is
dark outside.
•
IMPORTANT!
Did you read the whole guide and by doing so you
checked the SYSTEM_ACTIVE in the app? If you didn't, read through
the XBB Dongle installation again please.
