29
CAPTURE
Using Batch capture:
1
Turn on your camcorder and set it to
Play (or VTR / VCR) mode. See your
camcorder’s manual for specific
instructions.
2
Run Ulead VideoStudio. Then, open a
project and go to the Capture step.
3
On the Options panel, click the right-
arrow button (or the middle button and
select Batch Capture). This moves to
the 2nd page on the Options panel for
Batch capture.
4
Click the Play button in Ulead
VideoStudio.
5
When you get to the part of the video
you want to record, click the Mark in a
new task button (F3). Click the Mark
out a new task button (F4) to end the
task.
6
Keep watching the video, and then
repeat step 4 as needed.
7
If you feel these tasks are what you want,
click the Start batch capturing from
the Tasks list button. Otherwise, adjust
the tasks by using modification buttons.
(You can also directly double-clicking a
task, and then enter new timecode.) Once
you are done, click the capturing button.
8
Batch capture starts based on all or
selected (if any) tasks. The process stops
when the last task is captured. A report
appears also for your reference.
Note:
It is up to you whether to click the Stop button before starting Batch capture. Yet, if you need to
modify some tasks, clicking the Stop button first helps VideoStudio find tasks to be captured earlier.