T356 User Manual
---18---
use the configuration parameter of “Long interval “cycle upload message and
data. Therefore, the device will be in off status when it does not need to upload
data for a long time and it’ll achieve power saving function. The device will be
automatic wake-up to upload data if it’s needed. The device will be in the
power-saving status according to the configured condition of power save status.
Login device via configuration software, select “Service” option as below
showed:
Selected “device upload cycle” switch to “long interval” status.
Click “Write” button to finish setting.
5.4.2 Power Down Setting
To further economize power and protect the car battery, can set device to be in
off status when achieve the condition of the configuration. When the condition
of the shutdown is removed, device will automatically exit the off status.
Login device via configuration software, select “Function” option as below
showed:
Setting the battery low voltage threshold value of vehicle detection:
Click “Write” button, Select “Service” option as below showed:
Selected the condition of device in off status and delay time:
Click “Write” button to finish setting.
6.Connect with Immobilizer
Details refer to document of “OBD tracking device immobilizer installation user
guide”
