T356 User Manual
---10---
3.Getting Started
3.1 Preparation
The device with the default built-in 16Mb Flash to store the data, user also can
use Micro-SD card to expand the storage space of the device. If user does not
need the expanded Micro-SD card, please refer to 3.5 section.
For Micro-SD card installation (Please choose this function firstly) The Micro-SD
card should be not more than 4G, and ensure the data of this card have been
copied. Because the original data of the card will be covered and cannot be
recovered when the device is working.
3.2 Opening the Case
First loosen these two nuts on the cover by cross screwdriver as below picture
showed:
Lift the upper cover near the end of the OBDII interface, from the fixed slot:
