UL Box Camera Type I, Руководство по установке

Страница: 133 / 162

Installation Manual of Network Camera
132

Press RESET about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.

A wireless router with the WPS function is required to enable the WPS function of the camera.
Refer the steps below.
Steps:
1. Press the WPS button on the router.
2. Press the WPS button (about 2s) on the camera within 120s you enable the WPS of the
router to join in the wireless network.

The WPS button works as a reset button only when you press it when the camera is powering
on.

Press the WPS button on the camera, and then press the WPS button on the router will work as
well, and the expire time of WPS connection on the camera is 120s.

The link indicator blinks if the wireless connection is succeeded.
7.3.2 Notice

Do not install the camera in the extreme
whether condition.

Do not touch the lens with
your finger.

Do not install the camera towards the
strong light or in the unstable
lightening condition.

Do not subject the camera
to vibration, shock or heavy
pressure.