ELECTRICAL SAFETY
Your charger has designed for a specific mains voltage. Always check that the mains voltage
corresponds to the voltage on the rating plate.
!
Fig.A
OVERVIEW(Fig.A)
1. Blade
2.Guard
3.Front handle 4.Main switch 5.Battery pack 6.Blade sheath
7. Charger 8.Charging indicator 9.Charge station
ASSEMBLY
Warning! Before assembly, remove the battery pack from the tool.
!
!
F
Fig.B
Fitting and removing the battery(Fig.B)
Your hedge trimmer is equipped with a battery pack, which powers the unit.
To fit battery pack
1. Place battery pack in your hedge trimmer. Align raised rib on battery pack with groove inside
hedge trimmer. See Figure B.
2. Make sure the latches on each side of your battery pack snap in place and battery pack secured
in hedge trimmer before beginning operation.
To remove battery pack
1.Locate latches on end of battery pack and depress to release battery pack from your hedge
trimmer.
2. Remove battery pack from your hedge trimmer. See Figure B.
!
10
